Unit 42 Feed

This Integration is part of the Unit 42 Threat Intelligence by Palo Alto Networks Pack.

Supported versions

Supported Cortex XSOAR versions: 6.10.0 and later.

Unit 42 Feed integration provides threat intelligence from Palo Alto Networks Unit 42 research team.

Configure Unit 42 Feed in Cortex

Parameter	Description	Required
Fetch indicators	Select this check box to fetch indicators (default selected).	True
Feed Types	Choose the requested indicator feeds. Indicators feed and Threat Objects (actors, malware, campaigns, techniques, etc.) feed (default is both).	True
Indicator Types	Comma-separated list of indicator types to fetch (File, IP, URL, Domain). If not specified, all indicator types are fetched.	False
Maximum Indicators Per Fetch	Maximum number of indicators to fetch per type.	False
Source Reliability	Reliability of the source providing the intelligence context.	True
Tags	Supports CSV values.	False
Traffic Light Protocol Color (TLP).	The Traffic Light Protocol (TLP) designation is to apply to indicators fetched from the feed.	False
Indicator Reputation	Indicators from this integration instance will be marked with this reputation	True
Feed Expiration Policy	The feed's expiration policy.	True
Indicator Expiration Interval	The indicator's expiration policy.	False
Create relationships	Create relationships with other indicators.	False
Bypass exclusion list	When selected, the exclusion list is ignored for indicators from this feed. This means that if an indicator from this feed is on the exclusion list, the indicator might still be added to the system.	False
Use system proxy settings		False
Trust any certificate (not secure)		False

How the Maximum Indicators Per Fetch Parameter Works

The Maximum Indicators Per Fetch parameter controls the maximum number of indicators fetched per type during each fetch cycle. The integration enforces a total limit of 100,000 indicators across all types to ensure optimal performance.

Limit Calculation Algorithm

The limit per indicator type is calculated using the following logic:

1. If the limit is not specified or is negative:

   • Default limit per type = 100,000 / total_number_of_types

2. If the limit × total_number_of_types > 100,000:

   • Adjusted limit per type = 100,000 / total_number_of_types

3. Otherwise:

   • Uses the specified limit per type.

Examples

Example 1: No Limit Specified with 4 Types

• Configuration: Threat Objects + 3 indicator types (IP, Domain, URL)
• Total number of types: 4
• Calculation: 100,000 / 4 = 25,000 per type
• Result: Fetches up to 25,000 of each type (100,000 total)

Example 2: Limit Exceeds Total

• Configuration: Limit = 30,000, with 4 types selected
• Calculation: 30,000 × 4 = 120,000 > 100,000 (exceeds total limit)
• Adjusted: 100,000 / 4 = 25,000 per type
• Result: Fetches up to 25,000 of each type (100,000 total)

Example 3: Limit within Total

• Configuration: Limit = 20,000, with 4 types selected
• Calculation: 20,000 × 4 = 80,000 ≤ 100,000 (within total limit)
• Result: Fetches up to 20,000 of each type (80,000 total)

Example 4: Single Type

• Configuration: Limit not specified, only IP indicators selected
• Total types: 1
• Calculation: 100,000 / 1 = 100,000 per type
• Result: Fetches up to 100,000 IP indicators

Fetch Priority Order

When multiple types are configured, the integration fetches in the following priority order:

1. Threat Objects (if enabled)
2. IP indicators
3. Domain indicators
4. URL indicators
5. File indicators

If any type returns fewer indicators than its allocated limit, the unused quota is added to the last enabled type in the priority order, allowing it to fetch up to the total limit of 100,000 indicators.

Commands

You can execute these commands from the CLI, as part of an automation, or in a playbook. After you successfully execute a command, a DBot message appears in the War Room with the command details.

unit42-get-indicators

---

Gets indicators from the feed.

Base Command

unit42-get-indicators

Input

Argument Name	Description	Required
indicator_types	Comma-separated list of indicator types to fetch (File, IP, URL, Domain). If not specified, all indicator types are fetched. Possible values are: File, IP, URL, Domain. Default is File,IP,URL,Domain.	Optional
limit	The maximum number of indicators to return. The default is 10. The maximum is 5000. Default is 10.	Optional

Context Output

There is no context output for this command.

unit42-get-threat-objects

---

Gets threat objects from the feed.

Base Command

unit42-get-threat-objects

Input

Argument Name	Description	Required
limit	The maximum number of threat objects to return. The default is 10. The maximum is 5000. Default is 10.	Optional

Context Output

There is no context output for this command.