FortiManager

This Integration is part of the FortiManager Pack.#

FortiManager is a single console central management system that manages Fortinet Devices. This integration was integrated and tested with version 6.2.2 of FortiManager

Required Permissions#

Following are the required permissions for the integration commands:

Setting	Minimal Requirement
device-manager	Read-Only
global-policy-packages	Read-Write
adom-policy-packages	Read-Write
deploy-management	Read-Write

The eligible predefined administrator profiles are: Super User, Standard User, and Package User. For more information about administrator permissions see the FortiManager documentation.

Configure FortiManager in Cortex#

Parameter	Description	Required
url	Server URL	True
credentials	Username	True
adom	The instance ADOM	True
insecure	Trust any certificate (not secure)	False
proxy	Use system proxy settings	False

Commands#

You can execute these commands from the CLI, as part of an automation, or in a playbook. After you successfully execute a command, a DBot message appears in the War Room with the command details.

fortimanager-devices-list#

List all devices in the ADOM instance.

Base Command#

fortimanager-devices-list

Input#

Argument Name	Description	Required
adom	The FortiManager Administrative Domain (ADOM) from which to fetch the devices. Leave empty to use the instance ADOM.	Optional
device	The name of a specific device to get. If not specified, will get all devices.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	Until which index to get the list. Default is 50.	Optional

Context Output#

Path	Type	Description
FortiManager.Device.adm_pass	String	The ADOM password.
FortiManager.Device.adm_usr	String	The ADOM user.
FortiManager.Device.app_ver	String	The app version of the device.
FortiManager.Device.av_ver	String	The antivirus version of the device.
FortiManager.Device.beta	Number	The beta version of the device.
FortiManager.Device.branch_pt	Number	The branch point of the device.
FortiManager.Device.build	Number	The build of the device.
FortiManager.Device.checksum	String	The checksum of the device.
FortiManager.Device.conf_status	String	The configuration status of the device.
FortiManager.Device.conn_mode	String	The connection mode of the device.
FortiManager.Device.conn_status	String	The connection status of the device.
FortiManager.Device.db_status	String	The database status of the device.
FortiManager.Device.desc	String	The description of the device.
FortiManager.Device.dev_status	String	The status of the device.
FortiManager.Device.fap_cnt	Number	The FortiManager access point count.
FortiManager.Device.faz.full_act	Number	Full act.
FortiManager.Device.faz.perm	Number	Perm.
FortiManager.Device.faz.quota	Number	Quota.
FortiManager.Device.faz.used	Number	Used.
FortiManager.Device.fex_cnt	Number	Fex count.
FortiManager.Device.flags	String	Flags.
FortiManager.Device.foslic_cpu	Number	Foslic CPU.
FortiManager.Device.foslic_dr_site	String	Foslic dr site.
FortiManager.Device.foslic_inst_time	Number	Foslic inst time.
FortiManager.Device.foslic_last_sync	Number	Foslic last sync.
FortiManager.Device.foslic_ram	Number	Foslic RAM.
FortiManager.Device.foslic_type	String	Foslic type.
FortiManager.Device.foslic_utm	String	Foslic UTM.
FortiManager.Device.fsw_cnt	Number	FSW count.
FortiManager.Device.ha_group_id	Number	HA group ID.
FortiManager.Device.ha_group_name	String	HA group name.
FortiManager.Device.ha_mode	String	HA mode.
FortiManager.Device.hdisk_size	Number	Hard disk size.
FortiManager.Device.hostname	String	Hostname.
FortiManager.Device.hw_rev_major	Number	Hardware major revision number.
FortiManager.Device.hw_rev_minor	Number	Hardware minor revision number.
FortiManager.Device.ip	String	Device IP.
FortiManager.Device.ips_ext	Number	External IP.
FortiManager.Device.ips_ver	String	IP version.
FortiManager.Device.last_checked	Number	Last checked.
FortiManager.Device.last_resync	Number	Last resync.
FortiManager.Device.latitude	String	Latitude.
FortiManager.Device.lic_flags	Number	License flags.
FortiManager.Device.lic_region	String	License region.
FortiManager.Device.location_from	String	Location from.
FortiManager.Device.logdisk_size	Number	Log disk size.
FortiManager.Device.longitude	String	Longitude.
FortiManager.Device.maxvdom	Number	Maximum VDOM.
FortiManager.Device.meta_fields	String	Meta fields.
FortiManager.Device.mgmt_id	Number	Management ID.
FortiManager.Device.mgmt_if	String	Management IF.
FortiManager.Device.mgmt_mode	String	Management mode.
FortiManager.Device.mgt_vdom	String	Management VDOM.
FortiManager.Device.module_sn	String	Module serial number.
FortiManager.Device.mr	Number	Mr.
FortiManager.Device.name	String	Device name.
FortiManager.Device.os_type	String	Device operating system type.
FortiManager.Device.os_ver	String	Device operating system version.
FortiManager.Device.patch	Number	Patch.
FortiManager.Device.platform_str	String	Platform string.
FortiManager.Device.prefer_img_ver	String	Prefer image version.
FortiManager.Device.prio	Number	Prio.
FortiManager.Device.psk	String	PSK.
FortiManager.Device.role	String	Device role.
FortiManager.Device.sn	String	Serial number.
FortiManager.Device.vdom.comments	String	VDOM comments.
FortiManager.Device.vdom.name	String	VDOM name.
FortiManager.Device.vdom.opmode	String	VDOM opmode.
FortiManager.Device.vdom.rtm_prof_id	Number	VDOM rtm prof ID.
FortiManager.Device.vdom.status	String	VDOM status.
FortiManager.Device.vdom.vpn_id	Number	VDOM VPN ID.
FortiManager.Device.version	Number	Device version.
FortiManager.Device.vm_cpu	Number	VM CPU.
FortiManager.Device.vm_cpu_limit	Number	VM CPU limit.
FortiManager.Device.vm_lic_expire	Number	VM license expiration.
FortiManager.Device.vm_mem	Number	VM memory.
FortiManager.Device.vm_mem_limit	Number	VM memory limit.
FortiManager.Device.vm_status	Number	VM status.

Command Example#

!fortimanager-devices-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "Device": [
            {
                "adm_pass": [
                    "ENC",
                    "MMM"
                ],
                "adm_usr": "",
                "app_ver": "",
                "av_ver": "",
                "beta": -1,
                "branch_pt": 4271,
                "build": 4148,
                "checksum": "",
                "conf_status": 0,
                "conn_mode": 0,
                "conn_status": 0,
                "db_status": 2,
                "desc": "",
                "dev_status": 0,
                "fap_cnt": 0,
                "faz.full_act": 0,
                "faz.perm": 15,
                "faz.quota": 0,
                "faz.used": 0,
                "fex_cnt": 0,
                "flags": 2,
                "foslic_cpu": 0,
                "foslic_dr_site": 0,
                "foslic_inst_time": 0,
                "foslic_last_sync": 0,
                "foslic_ram": 0,
                "foslic_type": 0,
                "foslic_utm": 0,
                "fsw_cnt": 0,
                "ha_group_id": 0,
                "ha_group_name": "",
                "ha_mode": 0,
                "ha_slave": null,
                "hdisk_size": 0,
                "hostname": "",
                "hw_rev_major": 0,
                "hw_rev_minor": 0,
                "ip": "1.2.3.4",
                "ips_ext": 0,
                "ips_ver": "",
                "last_checked": 0,
                "last_resync": 0,
                "latitude": "0.0",
                "lic_flags": 0,
                "lic_region": "",
                "location_from": null,
                "logdisk_size": 0,
                "longitude": "0.0",
                "maxvdom": 500,
                "mgmt.__data[0]": 0,
                "mgmt.__data[1]": 0,
                "mgmt.__data[2]": 0,
                "mgmt.__data[3]": 0,
                "mgmt.__data[4]": 0,
                "mgmt.__data[5]": 0,
                "mgmt.__data[6]": 0,
                "mgmt.__data[7]": 0,
                "mgmt_id": 2104064363,
                "mgmt_if": "",
                "mgmt_mode": 2,
                "mgt_vdom": "",
                "module_sn": null,
                "mr": 6,
                "name": "device_name",
                "node_flags": 0,
                "oid": 156,
                "opts": 0,
                "os_type": 0,
                "os_ver": 5,
                "patch": 6,
                "platform_str": "Fortigate-6000F",
                "prefer_img_ver": null,
                "psk": "",
                "sn": "device_name",
                "source": 2,
                "tab_status": "",
                "tunnel_cookie": "",
                "tunnel_ip": "",
                "vdom": [
                    {
                        "comments": null,
                        "devid": "device_name",
                        "ext_flags": 1,
                        "flags": 0,
                        "name": "root",
                        "node_flags": 0,
                        "oid": 3,
                        "opmode": 1,
                        "rtm_prof_id": 0,
                        "status": null,
                        "tab_status": null,
                        "vpn_id": 0
                    },
                    {
                        "comments": null,
                        "devid": "device_name",
                        "ext_flags": 0,
                        "flags": 0,
                        "name": "mgmt-vdom",
                        "node_flags": 0,
                        "oid": 101,
                        "opmode": 1,
                        "rtm_prof_id": 0,
                        "status": null,
                        "tab_status": null,
                        "vpn_id": 0
                    }
                ],
                "version": 500,
                "vm_cpu": 0,
                "vm_cpu_limit": 0,
                "vm_lic_expire": 0,
                "vm_mem": 0,
                "vm_mem_limit": 0,
                "vm_status": 0
            }
        ]
    }
}

Human Readable Output#

ADOM adom/root Devices#
Name Ip Hostname Os Type Adm Usr Vdom Ha Mode
device_name 1.2.3.4 0 root, mgmt-vdom 0
Another_device 2.3.4.5 Another_device 4 admin root 0

Name	Ip	Hostname	Os Type	Adm Usr	Vdom	Ha Mode
device_name	1.2.3.4		0		root, mgmt-vdom	0
Another_device	2.3.4.5	Another_device	4	admin	root	0

fortimanager-device-groups-list#

List ADOM device groups.

Base Command#

fortimanager-device-groups-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the device groups. Leave empty to use the instance ADOM.	Optional
group	The name of a device group to fetch. If not specified, will get all device groups.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	Until which index to get the list. Default is 50.	Optional

Context Output#

Path	Type	Description
FortiManager.DeviceGroup.desc	String	Description.
FortiManager.DeviceGroup.meta_fields	String	Device group meta fields.
FortiManager.DeviceGroup.name	String	Device group name.
FortiManager.DeviceGroup.os_type	String	Device group operating system type.
FortiManager.DeviceGroup.type	String	Device group type.

Command Example#

!fortimanager-device-groups-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "DeviceGroup": [
            {
                "desc": "",
                "name": "All_FortiAnalyzer",
                "oid": 253,
                "os_type": 4,
                "type": 1
            },
            {
                "desc": "",
                "name": "All_FortiGate",
                "oid": 101,
                "os_type": 0,
                "type": 1
            }
        ]
    }
}

Human Readable Output#

ADOM adom/root Device Groups#
Name Type Os Type
All_FortiAnalyzer 1 4
All_FortiGate 1 0

Name	Type	Os Type
All_FortiAnalyzer	1	4
All_FortiGate	1	0

fortimanager-address-list#

List ADOM firewall IPv4 addresses.

Base Command#

fortimanager-address-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the addresses. Leave empty to use the instance ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list. Default is 50.	Optional
address	The name of a specific address to fetch. If not specified, will get all addresses.	Optional

Context Output#

Path	Type	Description
FortiManager.Address._image-base64	String	Base64 of the address image.
FortiManager.Address.allow-routing	String	Enable/disable use of this address in the static route configuration.
FortiManager.Address.associated-interface	String	Network interface associated with address.
FortiManager.Address.cache-ttl	Number	Defines the minimal TTL of individual IP addresses in FQDN cache measured in seconds.
FortiManager.Address.color	Number	The color of the icon in the GUI.
FortiManager.Address.comment	String	The comments attached to the address.
FortiManager.Address.country	String	The IP addresses associated with a specific country.
FortiManager.Address.dynamic_mapping	String	The address dynamic mapping information.
FortiManager.Address.end-ip	String	The final IP address (inclusive) in the range for the address.
FortiManager.Address.epg-name	String	The endpoint group name.
FortiManager.Address.filter	String	The match criteria filter.
FortiManager.Address.fqdn	String	The fully qualified domain name (fqdn) address.
FortiManager.Address.list.ip	String	The IP list associated with the address.
FortiManager.Address.name	String	The address name.
FortiManager.Address.obj-id	String	The object ID for NSX.
FortiManager.Address.organization	String	The organization domain name (Syntax: organization/domain).
FortiManager.Address.policy-group	String	The policy group name.
FortiManager.Address.sdn	String	The software defined networking (SDN).
FortiManager.Address.sdn-tag	String	The software defined networking (SDN) tag.
FortiManager.Address.start-ip	String	The first IP address (inclusive) in the range for the address.
FortiManager.Address.subnet	String	The IP address and subnet mask of address.
FortiManager.Address.subnet-name	String	The subnet name.
FortiManager.Address.tagging.category	String	The tag category.
FortiManager.Address.tagging.name	String	The tagging entry name.
FortiManager.Address.tagging.tags	String	The tags.
FortiManager.Address.tenant	String	The tenant.
FortiManager.Address.type	String	The type of address.
FortiManager.Address.uuid	String	Universally Unique Identifier (UUID). This is automatically assigned but can be manually reset.
FortiManager.Address.visibility	String	Enable/disable address visibility in the GUI.
FortiManager.Address.wildcard	String	The IP address and wildcard netmask.
FortiManager.Address.wildcard-fqdn	String	The fully qualified domain name (fqdn) with wildcard characters.

Command Example#

!fortimanager-address-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "Address": [
            {
                "associated-interface": [
                    "any"
                ],
                "clearpass-spt": 0,
                "color": 0,
                "dynamic_mapping": null,
                "end-ip": "1.2.3.4",
                "end-mac": "00:00:00:00:00:00",
                "list": null,
                "name": "FAC-SAML",
                "sdn-addr-type": 0,
                "start-ip": "2.3.4.5",
                "start-mac": "00:00:00:00:00:00",
                "tagging": null,
                "type": 1,
                "uuid": "Some-ID",
                "visibility": 1
            },
            {
                "allow-routing": 0,
                "associated-interface": [
                    "any"
                ],
                "clearpass-spt": 0,
                "color": 0,
                "dynamic_mapping": null,
                "end-mac": "00:00:00:00:00:00",
                "list": null,
                "name": "FIREWALL_AUTH_PORTAL_ADDRESS",
                "sdn-addr-type": 0,
                "start-mac": "00:00:00:00:00:00",
                "subnet": [
                    "0.0.0.0",
                    "0.0.0.0"
                ],
                "tagging": null,
                "type": 0,
                "uuid": "Some-ID",
                "visibility": 0
            }
        ]
    }
}

Human Readable Output#

Firewall IPv4 Addresses#
Name Type Subnet Start-ip End-ip
FAC-SAML 1 1.2.3.4 2.3.4.5
FIREWALL_AUTH_PORTAL_ADDRESS 0 0.0.0.0,
0.0.0.0

Name	Type	Subnet	Start-ip	End-ip
FAC-SAML	1		1.2.3.4	2.3.4.5
FIREWALL_AUTH_PORTAL_ADDRESS	0	0.0.0.0, 0.0.0.0

fortimanager-address-create#

Add a new IPv4 address.

Base Command#

fortimanager-address-create

Input#

Argument Name	Description	Required
adom	The ADOM on which to create the address. Leave empty to use the instance ADOM.	Optional
name	The address name.	Required
type	The type of address. Possible values are: "ipmask", "iprange", "fqdn", "wildcard", "geography", "wildcard-fqdn", and "dynamic".	Required
policy_group	Policy group name.	Optional
comment	A comment to add to the address.	Optional
associated_interface	The network interface associated with the address.	Optional
fqdn	The fully qualified domain name (fqdn) address. Required for fqdn address type.	Optional
start_ip	First IP address (inclusive) in the range for the address. Required for iprange address type.	Optional
end_ip	Final IP address (inclusive) in the range for the address. Required for iprange address type.	Optional
subnet	IP address and subnet mask of address. Required for ipmask address type.	Optional
subnet_name	The subnet name	Optional
sdn	The address SDN. Required for dynamic address type. Possible values are: "aci", "aws", "nsx", "nuage", and "azure".	Optional
wildcard	IP address and wildcard netmask. Required for wildcard address type.	Optional
wildcard_fqdn	The fully qualified domain name (fqdn) with wildcard characters. Required for wildcard-fqdn address type.	Optional
country	The two letter abbreviation representing a country associated with an IP address (for example: "us"). Required for geography address type.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-address-create name=new_address type=iprange start_ip=1.2.3.4 end_ip=2.3.4.5

Human Readable Output#

Created new Address new_address

fortimanager-address-update#

Add a new IPv4 address.

Base Command#

fortimanager-address-update

Input#

Argument Name	Description	Required
adom	The ADOM on which to update the address. Leave empty to use the instance ADOM.	Optional
name	The address name.	Required
type	Type of address. Possible values are: "ipmask", "iprange", "fqdn", "wildcard", "geography", "wildcard-fqdn", and "dynamic".	Optional
policy_group	Policy group name.	Optional
comment	A comment to add to the address.	Optional
associated_interface	Network interface associated with address.	Optional
fqdn	The fully qualified domain name (fqdn) address. Required for fqdn address type.	Optional
start_ip	First IP address (inclusive) in the range for the address. Required for iprange address type.	Optional
end_ip	Final IP address (inclusive) in the range for the address. Required for iprange address type.	Optional
subnet	IP address and subnet mask of address. Required for ipmask address type.	Optional
subnet_name	The subnet name	Optional
sdn	The address SDN. Required for dynamic address type. Possible values are: "aci", "aws", "nsx", "nuage", and "azure".	Optional
wildcard	IP address and wildcard netmask. Required for wildcard address type.	Optional
wildcard_fqdn	The fully qualified domain name (fqdn) with wildcard characters. Required for wildcard-fqdn address type.	Optional
country	The two letter abbreviation representing a country associated with an IP address (for example: "us"). Required for geography address type.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-address-update name=new_address end_ip=3.3.3.3

Human Readable Output#

Updated Address new_address

fortimanager-address-delete#

Delete an address.

Base Command#

fortimanager-address-delete

Input#

Argument Name	Description	Required
adom	The ADOM from which to delete the address. Leave empty to use the default integration ADOM.	Optional
address	The address to delete.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-address-delete address=new_address

Human Readable Output#

Deleted Address new_address

fortimanager-address-group-list#

List ADOM IPv4 address groups.

Base Command#

fortimanager-address-group-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the address groups. Leave empty to use the instance ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list. Default is 50.	Optional
address_group	Name for a specific address group to fetch. If not specified, will get all address groups.	Optional

Context Output#

Path	Type	Description
FortiManager.AddressGroup._image-base64	String	Base64 of the address group image.
FortiManager.AddressGroup.allow-routing	String	Enable/disable use of this group in the static route configuration.
FortiManager.AddressGroup.color	Number	The color of the icon in the GUI.
FortiManager.AddressGroup.comment	String	The comment about the address group.
FortiManager.AddressGroup.dynamic_mapping._image-base64	String	The address group dynamic mapping base64 image.
FortiManager.AddressGroup.dynamic_mapping._scope.name	String	The address group dynamic mapping scope name.
FortiManager.AddressGroup.dynamic_mapping._scope.vdom	String	The address group dynamic mapping scope VDOM.
FortiManager.AddressGroup.dynamic_mapping.allow-routing	String	Enable/disable use of this dynamic mapping in the static route configuration.
FortiManager.AddressGroup.dynamic_mapping.color	Number	The color of the icon in the GUI.
FortiManager.AddressGroup.dynamic_mapping.comment	String	The comment about the address group dynamic mapping.
FortiManager.AddressGroup.dynamic_mapping.exclude	String	Whether to enable or disable the exclusion of the dynamic mapping.
FortiManager.AddressGroup.dynamic_mapping.exclude-member	String	The exclude member.
FortiManager.AddressGroup.dynamic_mapping.global-object	Number	The global object.
FortiManager.AddressGroup.dynamic_mapping.member	String	The address group dynamic mapping member.
FortiManager.AddressGroup.dynamic_mapping.tags	String	The address group dynamic mapping tags.
FortiManager.AddressGroup.dynamic_mapping.type	String	The address group dynamic mapping type.
FortiManager.AddressGroup.dynamic_mapping.uuid	String	The address group dynamic mapping UUID.
FortiManager.AddressGroup.dynamic_mapping.visibility	String	The address group dynamic mapping visibility.
FortiManager.AddressGroup.member	String	The address objects contained within the group.
FortiManager.AddressGroup.name	String	The address group name.
FortiManager.AddressGroup.tagging.category	String	The tag category.
FortiManager.AddressGroup.tagging.name	String	The tagging entry name.
FortiManager.AddressGroup.tagging.tags	String	The tags.
FortiManager.AddressGroup.uuid	String	Universally Unique Identifier (UUID). This is automatically assigned but can be manually reset.
FortiManager.AddressGroup.visibility	String	Enable/disable address visibility in the GUI.

Command Example#

!fortimanager-address-group-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "AddressGroup": [
            {
                "allow-routing": 0,
                "color": 0,
                "dynamic_mapping": null,
                "exclude": 0,
                "exclude-member": [],
                "member": [
                    "address1",
                    "address2",
                ],
                "name": "my_address_group",
                "tagging": null,
                "uuid": "Some-ID",
                "visibility": 1
            },
            {
                "allow-routing": 1,
                "color": 0,
                "comment": "VPN: To-600E (Created by VPN wizard)",
                "dynamic_mapping": null,
                "exclude": 0,
                "exclude-member": [],
                "member": [
                    "some_address"
                ],
                "name": "another_address_group",
                "tagging": null,
                "uuid": "Some-ID",
                "visibility": 1
            }
        ]
    }
}

Human Readable Output#

Firewall IPv4 Address Groups#
Name Member Allow-routing
my_address_group address1,
address2 0
another_address_group some_address 1

Name	Member	Allow-routing
my_address_group	address1, address2	0
another_address_group	some_address	1

fortimanager-address-group-create#

Create a new address group.

Base Command#

fortimanager-address-group-create

Input#

Argument Name	Description	Required
adom	The ADOM on which to create the address group. Leave empty to use the instance ADOM.	Optional
name	Address group name.	Required
member	A comma-separated list of the address or address group objects contained within the group.	Required
comment	A comment about the address group.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-address-group-create name=new_address_group member=new_address,my_address2

Human Readable Output#

Created new Address Group new_address_group

fortimanager-address-group-update#

Create a new address group.

Base Command#

fortimanager-address-group-update

Input#

Argument Name	Description	Required
adom	The ADOM on which to update the address group. Leave empty to use the instance ADOM.	Optional
name	Address group name.	Required
member	A comma-separated list of the address or address group objects contained within the group.	Optional
comment	A comment about the address group.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-address-group-update name=new_address_group member=new_address

Human Readable Output#

Updated Address Group new_address_group

fortimanager-address-group-delete#

Delete an address group.

Base Command#

fortimanager-address-group-delete

Input#

Argument Name	Description	Required
adom	The ADOM from which to delete the address group. Leave empty to use the default integration ADOM.	Optional
address_group	The address group to delete.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-address-group-delete address_group=new_address_group

Human Readable Output#

Deleted Address Group new_address_group

fortimanager-service-categories-list#

List the ADOM service categories.

Base Command#

fortimanager-service-categories-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the service categories. Leave empty to use the instance ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list. Default is 50.	Optional
service_category	Name of a specific category to fetch. If not specified, will get all service groups.	Optional

Context Output#

Path	Type	Description
FortiManager.ServiceCategory.comment	String	Comment.
FortiManager.ServiceCategory.name	String	Service category name.

Command Example#

!fortimanager-service-categories-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "ServiceCategory": [
            {
                "comment": "Web access.",
                "name": "Web Access",
                "obj seq": 2
            },
            {
                "comment": "File access.",
                "name": "File Access",
                "obj seq": 3
            }
        ]
    }
}

Human Readable Output#

Service Categories#
Name Comment
Web Access Web access.
File Access File access.

Name	Comment
Web Access	Web access.
File Access	File access.

fortimanager-service-group-list#

List ADOM service groups.

Base Command#

fortimanager-service-group-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the service groups. Leave empty to use the instance ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list. Default is 50.	Optional
service_group	Name of a specific service group to fetch. If not specified, will get all service groups.	Optional

Context Output#

Path	Type	Description
FortiManager.ServiceGroup.color	Number	The color of the icon in the GUI.
FortiManager.ServiceGroup.comment	String	Comment.
FortiManager.ServiceGroup.member	String	The service objects contained within the group.
FortiManager.ServiceGroup.name	String	The address group name.
FortiManager.ServiceGroup.proxy	String	Enable/disable web proxy service group.

Command Example#

!fortimanager-service-group-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "ServiceGroup": [
            {
                "color": 0,
                "member": [
                    "DNS",
                    "HTTP",
                    "HTTPS"
                ],
                "name": "Web Access",
                "proxy": 0
            },
            {
                "color": 0,
                "member": [
                    "DCE-RPC",
                    "DNS",
                    "KERBEROS",
                    "LDAP",
                    "LDAP_UDP",
                    "SAMBA",
                    "SMB"
                ],
                "name": "Windows AD",
                "proxy": 0
            }
        ]
    }
}

Human Readable Output#

Service Groups#
Name Member Proxy
Web Access DNS,
HTTP,
HTTPS 0
Windows AD DCE-RPC,
DNS,
KERBEROS,
LDAP,
LDAP_UDP,
SAMBA,
SMB 0

Name	Member	Proxy
Web Access	DNS, HTTP, HTTPS	0
Windows AD	DCE-RPC, DNS, KERBEROS, LDAP, LDAP_UDP, SAMBA, SMB	0

fortimanager-service-group-create#

Creates a new service group.

Base Command#

fortimanager-service-group-create

Input#

Argument Name	Description	Required
adom	The ADOM on which to create the service group. Leave empty to use the instance ADOM.	Optional
comment	A comment.	Optional
name	The created service group name.	Required
proxy	Enable/disable a web proxy service group.	Optional
member	A comma-separated list of service objects to be contained within the group.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-service-group-create member=new_service name=new_service_group

Human Readable Output#

Created new Service Group new_service_group

fortimanager-service-group-update#

Create a new service group.

Base Command#

fortimanager-service-group-update

Input#

Argument Name	Description	Required
adom	The ADOM on which to update the service group. Leave empty to use the instance ADOM.	Optional
comment	A comment.	Optional
name	The created service group name.	Required
proxy	Enable/disable a web proxy service group.	Optional
member	A comma-sperated list of service objects to be contained within the group.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-service-group-update name=new_service_group proxy=disable

Human Readable Output#

Updated Service Group new_service_group

fortimanager-service-group-delete#

Delete a service group

Base Command#

fortimanager-service-group-delete

Input#

Argument Name	Description	Required
adom	The ADOM from which to delete the service group. Leave empty to use the default integration ADOM.	Optional
service_group	The service group to delete.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-service-group-delete service_group=new_service_group

Human Readable Output#

Deleted Service Group new_service_group

fortimanager-custom-service-list#

List the custom services.

Base Command#

fortimanager-custom-service-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the custom service. Leave empty to use the instance ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list. Default is 50.	Optional
custom_service	Name of a specific custom service to fetch. If not specified, will get all custom services.	Optional

Context Output#

Path	Type	Description
FortiManager.CustomService.app-category	Number	Application category ID.
FortiManager.CustomService.app-service-type	String	Application service type.
FortiManager.CustomService.application	Number	Application ID.
FortiManager.CustomService.category	String	Service category.
FortiManager.CustomService.check-reset-range	String	Configure the type of ICMP error message verification.
FortiManager.CustomService.color	Number	Color of icon in the GUI.
FortiManager.CustomService.comment	String	Comment.
FortiManager.CustomService.fqdn	String	Fully qualified domain (fqdn) name.
FortiManager.CustomService.helper	String	Helper name.
FortiManager.CustomService.icmpcode	Number	ICMP code.
FortiManager.CustomService.icmptype	Number	ICMP type.
FortiManager.CustomService.iprange	String	Start and end of the IP range associated with service.
FortiManager.CustomService.name	String	Custom service name.
FortiManager.CustomService.protocol	String	Protocol type based on IANA numbers.
FortiManager.CustomService.protocol-number	Number	IP protocol number.
FortiManager.CustomService.proxy	String	Enable/disable a web proxy service.
FortiManager.CustomService.sctp-portrange	String	Multiple SCTP port ranges.
FortiManager.CustomService.session-ttl	Number	Session TTL (300 - 604800. Default is 0.).
FortiManager.CustomService.tcp-halfclose-timer	Number	Wait time to close a TCP session waiting for an unanswered FIN packet (1 - 86400 sec. Default is 0.).
FortiManager.CustomService.tcp-halfopen-timer	Number	Wait time to close a TCP session waiting for an unanswered open session packet (1 - 86400 sec. Default is 0.).
FortiManager.CustomService.tcp-portrange	String	Multiple TCP port ranges.
FortiManager.CustomService.tcp-timewait-timer	Number	Set the length of the TCP TIME-WAIT state in seconds (1 - 300 sec. Default is 0.).
FortiManager.CustomService.udp-idle-timer	Number	UDP half close timeout (0 - 86400 sec. Default is 0.).
FortiManager.CustomService.udp-portrange	String	Multiple UDP port ranges.
FortiManager.CustomService.visibility	String	Enable/disable the visibility of the service in the GUI.

Command Example#

!fortimanager-custom-service-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "CustomService": [
            {
                "app-category": [],
                "app-service-type": 0,
                "application": [],
                "category": [
                    "General"
                ],
                "check-reset-range": 3,
                "color": 0,
                "helper": 1,
                "iprange": "0.0.0.0",
                "name": "ALL_TCP",
                "obj seq": 2,
                "protocol": 5,
                "proxy": 0,
                "sctp-portrange": [],
                "session-ttl": 0,
                "tcp-halfclose-timer": 0,
                "tcp-halfopen-timer": 0,
                "tcp-portrange": [
                    "1-65535"
                ],
                "tcp-timewait-timer": 0,
                "udp-idle-timer": 0,
                "udp-portrange": [],
                "visibility": 1
            },
            {
                "app-category": [],
                "app-service-type": 0,
                "application": [],
                "category": [
                    "General"
                ],
                "check-reset-range": 3,
                "color": 0,
                "helper": 1,
                "iprange": "0.0.0.0",
                "name": "ALL_UDP",
                "obj seq": 3,
                "protocol": 5,
                "proxy": 0,
                "sctp-portrange": [],
                "session-ttl": 0,
                "tcp-halfclose-timer": 0,
                "tcp-halfopen-timer": 0,
                "tcp-portrange": [],
                "tcp-timewait-timer": 0,
                "udp-idle-timer": 0,
                "udp-portrange": [
                    "1-65535"
                ],
                "visibility": 1
            }
        ]
    }
}

Human Readable Output#

Custom Services#
Name Category Protocol Iprange
ALL_TCP General 5 0.0.0.0
ALL_UDP General 5 0.0.0.0

Name	Category	Protocol	Iprange
ALL_TCP	General	5	0.0.0.0
ALL_UDP	General	5	0.0.0.0

fortimanager-custom-service-create#

Create a new custom service.

Base Command#

fortimanager-custom-service-create

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the custom service. Leave empty to use the instance ADOM.	Optional
name	The name of the new custom service.	Required
app_category	Application category ID.	Optional
app_service_type	Application service type. Possible values are: "app-id", "disable", and "app-category". Default is "disable".	Optional
application	The application ID.	Optional
category	The service category.	Optional
check_reset_range	Configure the type of ICMP error message verification. Possible values are: "disable", "default", and "strict".	Optional
comment	A comment.	Optional
fqdn	Fully qualified domain name (fqdn).	Optional
helper	Helper name.	Optional
icmpcode	ICMP code.	Optional
icmptype	ICMP type.	Optional
iprange	Start and end of the IP range associated with the service.	Optional
protocol	Protocol type based on IANA numbers. Possible values are: "ICMP", "IP", "TCP/UDP/SCTP", "ICMP6", "HTTP", "FTP", "CONNECT", "SOCKS", "ALL", "SOCKS-TCP", and "SOCKS-UDP".	Optional
proxy	Enable/disable a web proxy service.	Optional
sctp_portrange	Multiple SCTP port ranges.	Optional
session_ttl	Session TTL in the range of 300 - 604800. Default is 0.	Optional
tcp_halfclose_timer	Wait time to close a TCP session waiting for an unanswered FIN packet (1 - 86400 sec). Default is 0.	Optional
tcp_halfopen_timer	Wait time to close a TCP session waiting for an unanswered open session packet (1 - 86400 sec). Default is 0.	Optional
tcp_portrange	Multiple TCP port ranges.	Optional
tcp_timewait_timer	Set the length of the TCP TIME-WAIT state in seconds (1 - 300 sec). Default is 0.	Optional
udp_idle_timer	UDP half close timeout (0 - 86400 sec). Default is 0.	Optional
udp_portrange	Multiple UDP port ranges.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-custom-service-create name=new_service fqdn=demisto.com

Human Readable Output#

Created new Custom Service new_service

fortimanager-custom-service-update#

Update a custom service.

Base Command#

fortimanager-custom-service-update

Input#

Argument Name	Description	Required
adom	The ADOM in which to update the custom service. Leave empty to use the instance ADOM.	Optional
name	The name of the new custom service.	Required
app_category	Application category ID.	Optional
app_service_type	Application service type. Possible values are: "app-id", "disable", and "app-category". Default is "disable".	Optional
application	The application ID.	Optional
category	The service category.	Optional
check_reset_range	Configure the type of ICMP error message verification. Possible values are: "disable", "default", and "strict".	Optional
comment	A comment.	Optional
fqdn	Fully qualified domain name (fqdn).	Optional
helper	Helper name.	Optional
icmpcode	ICMP code.	Optional
icmptype	ICMP type.	Optional
iprange	Start and end of the IP range associated with service.	Optional
protocol	Protocol type based on IANA numbers. Possible values are: "ICMP", "IP", "TCP/UDP/SCTP", "ICMP6", "HTTP", "FTP", "CONNECT", "SOCKS", "ALL", "SOCKS-TCP", and "SOCKS-UDP".	Optional
proxy	Enable/disable a web proxy service.	Optional
sctp_portrange	Multiple SCTP port ranges.	Optional
session_ttl	Session TTL in the range of 300 - 604800. Default is 0.	Optional
tcp_halfclose_timer	Wait time to close a TCP session waiting for an unanswered FIN packet (1 - 86400 sec). Default is 0.	Optional
tcp_halfopen_timer	Wait time to close a TCP session waiting for an unanswered open session packet (1 - 86400 sec). Default is 0.	Optional
tcp_portrange	Multiple TCP port ranges.	Optional
tcp_timewait_timer	Set the length of the TCP TIME-WAIT state in seconds (1 - 300 sec). Default is 0.	Optional
udp_idle_timer	UDP half close timeout (0 - 86400 sec). Default is 0.	Optional
udp_portrange	Multiple UDP port ranges.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-custom-service-update name=new_service proxy=enable

Human Readable Output#

Updated Custom Service new_service

fortimanager-custom-service-delete#

Delete a custom service.

Base Command#

fortimanager-custom-service-delete

Input#

Argument Name	Description	Required
adom	The ADOM from which to delete the custom service. Leave empty to use the default integration ADOM.	Optional
custom	The custome service to delete.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-custom-service-delete custom=new_service

Human Readable Output#

Deleted Custom Service new_service

fortimanager-firewall-policy-package-list#

List ADOM policy packages.

Base Command#

fortimanager-firewall-policy-package-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to fetch the firewall policy packages. Leave empty to use the instance ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list. Default is 50.	Optional
policy_package	Name of a specific policy package to fetch. If not specified, will get all policy packages.	Optional

Context Output#

Path	Type	Description
FortiManager.PolicyPackage.name	String	Policy package name.
FortiManager.PolicyPackage.obj_ver	Number	Policy package object version.
FortiManager.PolicyPackage.oid	Number	Policy package OID.
FortiManager.PolicyPackage.package setting.central-nat	String	Whether to use the central NAT.
FortiManager.PolicyPackage.package setting.consolidated-firewall-mode	String	Whether to enable consolidate firewall mode.
FortiManager.PolicyPackage.package setting.fwpolicy-implicit-log	String	Whether to enable firewall policy implicit log.
FortiManager.PolicyPackage.package setting.fwpolicy6-implicit-log	String	Whether to enable firewall policy 6 implicit log.
FortiManager.PolicyPackage.package setting.inspection-mode	String	Package inspection mode.
FortiManager.PolicyPackage.package setting.ngfw-mode	String	Package NGFW mode.
FortiManager.PolicyPackage.package setting.ssl-ssh-profile	String	Package SSL SSH profile.
FortiManager.PolicyPackage.scope_member.name	String	Policy package scope member name.
FortiManager.PolicyPackage.scope_member.vdom	String	Policy package scope member VDOM.
FortiManager.PolicyPackage.subobj	Unknown	Policy package sub-objects.
FortiManager.PolicyPackage.type	String	Policy package type.

Command Example#

!fortimanager-firewall-policy-package-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "PolicyPackage": [
            {
                "name": "default",
                "obj ver": 1,
                "oid": 1303,
                "package settings": {
                    "central-nat": 0,
                    "consolidated-firewall-mode": 0,
                    "fwpolicy-implicit-log": 0,
                    "fwpolicy6-implicit-log": 0,
                    "ngfw-mode": 0
                },
                "type": "pkg"
            },
            {
                "name": "my_package",
                "obj ver": 8,
                "oid": 1356,
                "package settings": {
                    "fwpolicy-implicit-log": 0,
                    "fwpolicy6-implicit-log": 0,
                    "ngfw-mode": 1,
                    "ssl-ssh-profile": [
                        "NGFW-SSL-Inspection"
                    ]
                },
                "type": "pkg"
            }
        ]
    }
}

Human Readable Output#

Policy Packages#
Name Type
FG5H0E3917901297_root pkg
Corp_Shared pkg

Name	Type
FG5H0E3917901297_root	pkg
Corp_Shared	pkg

fortimanager-firewall-policy-package-create#

Create a new firewall policy package.

Base Command#

fortimanager-firewall-policy-package-create

Input#

Argument Name	Description	Required
adom	The ADOM on which to create the service group. Leave empty to use the instance ADOM.	Optional
name	The name of the new policy package.	Required
type	The type of package. Possible values are: "pkg" and "folder".	Required
central_nat	Whether to use central NAT. Default is "disable".	Optional
consolidated_firewall_mode	Whether to enable consolidate firewall mode. Default is "disable".	Optional
fwpolicy_implicit_log	Whether to enable firewall policy implicit log. Default is "disable".	Optional
fwpolicy6_implicit_log	Whether to enable firewall policy 6 implicit log. Default is "disable".	Optional
inspection_mode	Package inspection mode. Possible values are: "proxy" and "flow". Default is "proxy".	Optional
ngfw_mode	Package NGFW mode. Possible values are: "profile-based" and "policy-based". Default is "profile-based".	Optional
ssl_ssh_profile	Package SSL SSH profile.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-firewall-policy-package-create name=new_package type=pkg

Human Readable Output#

Created new Policy Package new_package

fortimanager-firewall-policy-package-update#

Create a new firewall policy package.

Base Command#

fortimanager-firewall-policy-package-update

Input#

Argument Name	Description	Required
adom	The ADOM on which to update the service group. Leave empty to use the instance ADOM.	Optional
name	The name of the Policy Package to update.	Required
type	The type og package. Possible values are: "pkg" and "folder".	Optional
central_nat	Whether to use central NAT.	Optional
consolidated_firewall_mode	Whether to enable consolidate firewall mode.	Optional
fwpolicy_implicit_log	Whether to enable firewall policy implicit log.	Optional
fwpolicy6_implicit_log	Whether to enable firewall policy 6 implicit log.	Optional
inspection_mode	Package inspection mode. Possible values are: "proxy" and "flow".	Optional
ngfw_mode	Package NGFW mode. Possible values are: "profile-based" and "policy-based".	Optional
ssl_ssh_profile	Package SSL SSH profile.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-firewall-policy-package-update name=new_package central_nat=enable

Human Readable Output#

Update Policy Package new_package

fortimanager-firewall-policy-package-delete#

Delete a firewall policy package.

Base Command#

fortimanager-firewall-policy-package-delete

Input#

Argument Name	Description	Required
adom	The ADOM from which to delete the policy package. Leave empty to use the default integration ADOM.	Optional
pkg_path	The policy package path to delete.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-firewall-policy-package-delete pkg_path=new_package

Human Readable Output#

Deleted Policy Package new_package

fortimanager-firewall-policy-list#

List specific firewall policies from a policy package.

Base Command#

fortimanager-firewall-policy-list

Input#

Argument Name	Description	Required
package	The package from which to fetch the policies.	Required
adom	The ADOM from which to fetch the policies. Leave empty to use the instance ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list.	Optional
policy_id	An ID for the specific policy to fetch. If not specified, will get all policies.	Optional

Context Output#

Path	Type	Description
FortiManager.PolicyPackage.Policy.action	String	Policy action (allow/deny/ipsec).
FortiManager.PolicyPackage.Policy.app-category	String	Application category ID list.
FortiManager.PolicyPackage.Policy.app-group	String	Application group names.
FortiManager.PolicyPackage.Policy.application	Number	Application ID list.
FortiManager.PolicyPackage.Policy.application-list	String	Name of an existing application list.
FortiManager.PolicyPackage.Policy.auth-cert	String	HTTPS server certificate for policy authentication.
FortiManager.PolicyPackage.Policy.auth-path	String	Enable/disable authentication-based routing.
FortiManager.PolicyPackage.Policy.auth-redirect-addr	String	HTTP-to-HTTPS redirect address for firewall authentication.
FortiManager.PolicyPackage.Policy.auto-asic-offload	String	Enable/disable offloading security profile processing to CP processors.
FortiManager.PolicyPackage.Policy.av-profile	String	Name of an existing antivirus profile.
FortiManager.PolicyPackage.Policy.block-notification	String	Enable/disable block notification.
FortiManager.PolicyPackage.Policy.captive-portal-exempt	String	Enable to exempt some users from the captive portal.
FortiManager.PolicyPackage.Policy.capture-packet	String	Enable/disable capture packets.
FortiManager.PolicyPackage.Policy.comments	String	Comments.
FortiManager.PolicyPackage.Policy.custom-log-fields	String	Custom fields to append to log messages for this policy.
FortiManager.PolicyPackage.Policy.delay-tcp-npu-session	String	Enable TCP NPU session delay to guarantee packet order of 3-way handshake.
FortiManager.PolicyPackage.Policy.devices	String	Names of devices or device groups that can be matched by the policy.
FortiManager.PolicyPackage.Policy.diffserv-forward	String	Enable to change packet DiffServ values to the specified diffservcode-forward value.
FortiManager.PolicyPackage.Policy.diffserv-reverse	String	Enable to change packet reverse (reply) DiffServ values to the specified diffservcode-rev value.
FortiManager.PolicyPackage.Policy.diffservcode-forward	String	Change packet DiffServ to this value.
FortiManager.PolicyPackage.Policy.diffservcode-rev	String	Change packet reverse (reply) DiffServ to this value.
FortiManager.PolicyPackage.Policy.disclaimer	String	Enable/disable user authentication disclaimer.
FortiManager.PolicyPackage.Policy.dlp-sensor	String	Name of an existing DLP sensor.
FortiManager.PolicyPackage.Policy.dnsfilter-profile	String	Name of an existing DNS filter profile.
FortiManager.PolicyPackage.Policy.dscp-match	String	Enable DSCP check.
FortiManager.PolicyPackage.Policy.dscp-negate	String	Enable negated DSCP match.
FortiManager.PolicyPackage.Policy.dscp-value	String	DSCP value.
FortiManager.PolicyPackage.Policy.dsri	String	Enable DSRI to ignore HTTP server responses.
FortiManager.PolicyPackage.Policy.dstaddr	String	Destination address and address group names.
FortiManager.PolicyPackage.Policy.dstaddr-negate	String	When enabled, dstaddr specifies what the destination address must NOT be.
FortiManager.PolicyPackage.Policy.dstintf	String	Outgoing (egress) interface.
FortiManager.PolicyPackage.Policy.firewall-session-dirty	String	How to handle sessions if the configuration of this firewall policy changes.
FortiManager.PolicyPackage.Policy.fixedport	String	Enable to prevent source NAT from changing a session source port.
FortiManager.PolicyPackage.Policy.fsso	String	Enable/disable Fortinet single sign-on.
FortiManager.PolicyPackage.Policy.fsso-agent-for-ntlm	String	FSSO agent to use for NTLM authentication.
FortiManager.PolicyPackage.Policy.global-label	String	Label for the policy that appears when the GUI is in Global View mode.
FortiManager.PolicyPackage.Policy.groups	String	Names of user groups that can authenticate with this policy.
FortiManager.PolicyPackage.Policy.gtp-profile	String	GTP profile.
FortiManager.PolicyPackage.Policy.icap-profile	String	Name of an existing ICAP profile.
FortiManager.PolicyPackage.Policy.identity-based-route	String	Name of identity-based routing rule.
FortiManager.PolicyPackage.Policy.inbound	String	Policy-based IPsec VPN. Only traffic from the remote network can initiate a VPN.
FortiManager.PolicyPackage.Policy.internet-service	String	Enable/disable use of internet services for this policy. If enabled, destination address and service are not used.
FortiManager.PolicyPackage.Policy.internet-service-custom	String	Custom internet service name.
FortiManager.PolicyPackage.Policy.internet-service-id	String	Internet service ID.
FortiManager.PolicyPackage.Policy.internet-service-negate	String	When enabled, internet service specifies what the service must NOT be.
FortiManager.PolicyPackage.Policy.internet-service-src	String	Enable/disable use of internet services in source for this policy. If enabled, source address is not used.
FortiManager.PolicyPackage.Policy.internet-service-src-custom	String	Custom internet service source name.
FortiManager.PolicyPackage.Policy.internet-service-src-id	String	Internet service source ID.
FortiManager.PolicyPackage.Policy.internet-service-src-negate	String	When enabled, internet-service-src specifies what the service must NOT be.
FortiManager.PolicyPackage.Policy.ippool	String	Enable to use IP pools for source NAT.
FortiManager.PolicyPackage.Policy.ips-sensor	String	Name of an existing IPS sensor.
FortiManager.PolicyPackage.Policy.label	String	Label for the policy that appears when the GUI is in Section View mode.
FortiManager.PolicyPackage.Policy.learning-mode	String	Enable to allow everything, but log all of the meaningful data for security information gathering. A learning report will be generated.
FortiManager.PolicyPackage.Policy.logtraffic	String	Enable or disable logging. Log all sessions or security profile sessions.
FortiManager.PolicyPackage.Policy.logtraffic-start	String	Record logs when a session starts and ends.
FortiManager.PolicyPackage.Policy.match-vip	String	Enable to match packets that have had their destination addresses changed by a VIP.
FortiManager.PolicyPackage.Policy.mms-profile	String	Name of an existing MMS profile.
FortiManager.PolicyPackage.Policy.name	String	Policy name.
FortiManager.PolicyPackage.Policy.nat	String	Enable/disable a source NAT.
FortiManager.PolicyPackage.Policy.natinbound	String	Policy-based IPsec VPN: apply destination NAT to inbound traffic.
FortiManager.PolicyPackage.Policy.natip	String	Policy-based IPsec VPN: source NAT IP address for outgoing traffic.
FortiManager.PolicyPackage.Policy.natoutbound	String	Policy-based IPsec VPN: apply source NAT to outbound traffic.
FortiManager.PolicyPackage.Policy.np-acceleration	String	Enable/disable UTM Network Processor acceleration.
FortiManager.PolicyPackage.Policy.ntlm	String	Enable/disable NTLM authentication.
FortiManager.PolicyPackage.Policy.ntlm-enabled-browsers	String	HTTP-User-Agent value of supported browsers.
FortiManager.PolicyPackage.Policy.ntlm-guest	String	Enable/disable NTLM guest user access.
FortiManager.PolicyPackage.Policy.outbound	String	Policy-based IPsec VPN: only traffic from the internal network can initiate a VPN.
FortiManager.PolicyPackage.Policy.per-ip-shaper	String	Per-IP traffic shaper.
FortiManager.PolicyPackage.Policy.permit-any-host	String	Accept UDP packets from any host.
FortiManager.PolicyPackage.Policy.permit-stun-host	String	Accept UDP packets from any Session Traversal Utilities for NAT (STUN) host.
FortiManager.PolicyPackage.Policy.policyid	Number	Policy ID.
FortiManager.PolicyPackage.Policy.poolname	String	IP pool names.
FortiManager.PolicyPackage.Policy.profile-group	String	Name of profile group.
FortiManager.PolicyPackage.Policy.profile-protocol-options	String	Name of an existing protocol options profile.
FortiManager.PolicyPackage.Policy.profile-type	String	Determine whether the firewall policy allows security profile groups or single profiles only.
FortiManager.PolicyPackage.Policy.radius-mac-auth-bypass	String	Enable MAC authentication bypass. The bypassed MAC address must be received from RADIUS server.
FortiManager.PolicyPackage.Policy.redirect-url	String	The URL users are directed to after seeing and accepting the disclaimer or authenticating.
FortiManager.PolicyPackage.Policy.replacemsg-override-group	String	Override the default replacement message group for this policy.
FortiManager.PolicyPackage.Policy.rsso	String	Enable/disable RADIUS single sign-on (RSSO).
FortiManager.PolicyPackage.Policy.rtp-addr	String	Address names if this is an RTP NAT policy.
FortiManager.PolicyPackage.Policy.rtp-nat	String	Enable Real Time Protocol (RTP) NAT.
FortiManager.PolicyPackage.Policy.scan-botnet-connections	String	Block or monitor connections to Botnet servers or disable Botnet scanning.
FortiManager.PolicyPackage.Policy.schedule	String	Schedule name.
FortiManager.PolicyPackage.Policy.schedule-timeout	String	Enable to force current sessions to end when the schedule object times out. Disable allows them to end from inactivity.
FortiManager.PolicyPackage.Policy.send-deny-packet	String	Enable to send a reply when a session is denied or blocked by a firewall policy.
FortiManager.PolicyPackage.Policy.service	String	Service and service group names.
FortiManager.PolicyPackage.Policy.service-negate	String	When enabled, service specifies what the service must NOT be.
FortiManager.PolicyPackage.Policy.session-ttl	Number	TTL in seconds for sessions accepted by this policy. (0 means use the system default session TTL.)
FortiManager.PolicyPackage.Policy.spamfilter-profile	String	Name of an existing spam filter profile.
FortiManager.PolicyPackage.Policy.srcaddr	String	Source address and address group names.
FortiManager.PolicyPackage.Policy.srcaddr-negate	String	When enabled, srcaddr specifies what the source address must NOT be.
FortiManager.PolicyPackage.Policy.srcintf	String	Incoming (ingress) interface.
FortiManager.PolicyPackage.Policy.ssh-filter-profile	String	Name of an existing SSH filter profile.
FortiManager.PolicyPackage.Policy.ssl-mirror	String	Enable to copy decrypted SSL traffic to a FortiGate interface (called SSL mirroring).
FortiManager.PolicyPackage.Policy.ssl-mirror-intf	String	SSL mirror interface name.
FortiManager.PolicyPackage.Policy.ssl-ssh-profile	String	Name of an existing SSL SSH profile.
FortiManager.PolicyPackage.Policy.status	String	Enable or disable this policy.
FortiManager.PolicyPackage.Policy.tcp-mss-receiver	Number	Receiver TCP maximum segment size (MSS).
FortiManager.PolicyPackage.Policy.tcp-mss-sender	Number	Sender TCP maximum segment size (MSS).
FortiManager.PolicyPackage.Policy.tcp-session-without-syn	String	Enable/disable creation of TCP session without SYN flag.
FortiManager.PolicyPackage.Policy.timeout-send-rst	String	Enable/disable sending RST packets when TCP sessions expire.
FortiManager.PolicyPackage.Policy.traffic-shaper	String	Traffic shaper.
FortiManager.PolicyPackage.Policy.traffic-shaper-reverse	String	Reverse traffic shaper.
FortiManager.PolicyPackage.Policy.url-category	String	URL category ID list.
FortiManager.PolicyPackage.Policy.users	String	Names of individual users that can authenticate with this policy.
FortiManager.PolicyPackage.Policy.utm-status	String	Enable to add one or more security profiles (AV, IPS, etc.) to the firewall policy.
FortiManager.PolicyPackage.Policy.uuid	String	Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
FortiManager.PolicyPackage.Policy.vlan-cos-fwd	Number	VLAN forward direction user priority: 255 passthrough, 0 lowest, 7 highest.
FortiManager.PolicyPackage.Policy.vlan-cos-rev	Number	VLAN reverse direction user priority: 255 passthrough, 0 lowest, 7 highest.
FortiManager.PolicyPackage.Policy.vlan-filter	String	Set VLAN filters.
FortiManager.PolicyPackage.Policy.voip-profile	String	Name of an existing VoIP profile.
FortiManager.PolicyPackage.Policy.vpn_dst_node.host	String	VPN destination node host.
FortiManager.PolicyPackage.Policy.vpn_dst_node.seq	Number	VPN destination node sequence.
FortiManager.PolicyPackage.Policy.vpn_dst_node.subnet	String	VPN destination node subnet.
FortiManager.PolicyPackage.Policy.vpn_src_node.host	String	VPN source node host.
FortiManager.PolicyPackage.Policy.vpn_src_node.seq	Number	VPN source node sequence.
FortiManager.PolicyPackage.Policy.vpn_src_node.subnet	String	VPN source node subnet.
FortiManager.PolicyPackage.Policy.vpntunnel	String	Policy-based IPsec VPN: name of the IPsec VPN Phase 1.
FortiManager.PolicyPackage.Policy.waf-profile	String	Name of an existing Web application firewall profile.
FortiManager.PolicyPackage.Policy.wanopt	String	Enable/disable WAN optimization.
FortiManager.PolicyPackage.Policy.wanopt-detection	String	WAN optimization auto-detection mode.
FortiManager.PolicyPackage.Policy.wanopt-passive-opt	String	WAN optimization passive mode options. This option decides what IP address will be used to connect server.
FortiManager.PolicyPackage.Policy.wanopt-peer	String	WAN optimization peer.
FortiManager.PolicyPackage.Policy.wanopt-profile	String	WAN optimization profile.
FortiManager.PolicyPackage.Policy.wccp	String	Enable/disable forwarding traffic matching this policy to a configured WCCP server.
FortiManager.PolicyPackage.Policy.webcache	String	Enable/disable a web cache.
FortiManager.PolicyPackage.Policy.webcache-https	String	Enable/disable a web cache for HTTPS.
FortiManager.PolicyPackage.Policy.webfilter-profile	String	Name of an existing Web filter profile.
FortiManager.PolicyPackage.Policy.wsso	String	Enable/disable WiFi single sign-on (WSSO).

Command Example#

!fortimanager-firewall-policy-list package=new_package

Context Example#

{
    "FortiManager": {
        "PolicyPackage": {
            "Policy": {
                "_byte": 0,
                "_first_hit": 0,
                "_first_session": 0,
                "_global-vpn": [],
                "_global-vpn-tgt": 0,
                "_hitcount": 0,
                "_last_hit": 0,
                "_last_session": 0,
                "_pkts": 0,
                "_policy_block": 0,
                "_sesscount": 0,
                "action": 1,
                "anti-replay": 1,
                "app-group": [],
                "auto-asic-offload": 1,
                "block-notification": 0,
                "captive-portal-exempt": 0,
                "capture-packet": 0,
                "custom-log-fields": [],
                "delay-tcp-npu-session": 0,
                "diffserv-forward": 0,
                "diffserv-reverse": 0,
                "disclaimer": 0,
                "dsri": 0,
                "dstaddr": [
                    "all"
                ],
                "dstaddr-negate": 0,
                "dstintf": [
                    "any"
                ],
                "email-collect": 0,
                "fsso": 1,
                "fsso-agent-for-ntlm": [],
                "fsso-groups": [],
                "geoip-anycast": 0,
                "groups": [],
                "inspection-mode": 1,
                "internet-service": 0,
                "internet-service-src": 0,
                "logtraffic": 3,
                "logtraffic-start": 0,
                "match-vip": 0,
                "match-vip-only": 0,
                "name": "new_policy",
                "nat": 0,
                "natip": [
                    "0.0.0.0",
                    "0.0.0.0"
                ],
                "np-acceleration": 1,
                "obj seq": 1,
                "per-ip-shaper": [],
                "permit-any-host": 0,
                "policyid": 9,
                "profile-protocol-options": [
                    "default"
                ],
                "profile-type": 0,
                "radius-mac-auth-bypass": 0,
                "replacemsg-override-group": [],
                "reputation-direction": 2,
                "reputation-minimum": 0,
                "rtp-nat": 0,
                "schedule": [
                    "always"
                ],
                "schedule-timeout": 0,
                "service": [
                    "ALL"
                ],
                "service-negate": 0,
                "session-ttl": 0,
                "srcaddr": [
                    "all"
                ],
                "srcaddr-negate": 0,
                "srcintf": [
                    "any"
                ],
                "ssl-mirror": 0,
                "ssl-mirror-intf": [],
                "ssl-ssh-profile": [
                    "no-inspection"
                ],
                "status": 1,
                "tcp-mss-receiver": 0,
                "tcp-mss-sender": 0,
                "tcp-session-without-syn": 2,
                "timeout-send-rst": 0,
                "tos": "0x00",
                "tos-mask": "0x00",
                "tos-negate": 0,
                "traffic-shaper": [],
                "traffic-shaper-reverse": [],
                "users": [],
                "utm-status": 0,
                "uuid": "some-id",
                "vlan-cos-fwd": 255,
                "vlan-cos-rev": 255,
                "vpn_dst_node": null,
                "vpn_src_node": null,
                "wccp": 0,
                "webcache-https": 0,
                "webproxy-forward-server": [],
                "webproxy-profile": []
            }
        }
    }
}

Human Readable Output#

ADOM root Policy Package new_package Policies#
Policyid Name Srcintf Dstintf Srcaddr Dstaddr Schedule Service Action
9 new_policy any any all all always ALL 1

Policyid	Name	Srcintf	Dstintf	Srcaddr	Dstaddr	Schedule	Service	Action
9	new_policy	any	any	all	all	always	ALL	1

fortimanager-firewall-policy-create#

Create a firewall policy.

Base Command#

fortimanager-firewall-policy-create

Input#

Argument Name	Description	Required
adom	The ADOM on which to create the service group. Leave empty to use the instance ADOM.	Optional
package	The package from which to create the policy.	Required
action	The policy action. Possible values are: "deny", "accept", "ipsec", and "ssl-vpn".	Required
comments	A comment.	Optional
dstaddr	Destination address name. Note: dstaddr6 or dstaddr must be set.	Optional
dstaddr6	IPv6 destination address (web proxy only). Note: dstaddr6 or dstaddr must be set.	Optional
dstaddr_negate	Enable/disable a negated destination address match.	Optional
dstintf	Destination interface name.	Optional
srcaddr	Source address name. Note: srcaddr or srcaddr6 must be set.	Optional
srcaddr6	IPv6 source address (web proxy only). Note: srcaddr or srcaddr6 must be set.	Optional
srcaddr_negate	Enable/disable a negated source address match.	Optional
srcintf	Source interface name.	Optional
additional_params	A comma-separated list of additional params and their values. For example: Field1=Value1,Field2=Value2.	Optional
name	The name of the policy to create.	Required
logtraffic	Enable or disable logging. Log all sessions or security profile sessions. Possible values are: "enable", "disable", "all", and "utm".	Required
schedule	Schedule name. Default is "always".	Required
service	Service and service group names. Default is "ALL".	Required
status	Enable or disable this policy.	Required
policyid	The ID of the policy to create. Leave empty to use system default.	Optional

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-firewall-policy-create action=accept logtraffic=utm name=new_policy package=new_package dstaddr=all srcaddr=all policyid=9

Human Readable Output#

Created policy with ID 9

fortimanager-firewall-policy-update#

Update a firewall policy.

Base Command#

fortimanager-firewall-policy-update

Input#

Argument Name	Description	Required
adom	The ADOM on which to update the service group. Leave empty to use the instance ADOM.	Optional
package	The package from which to update the policy.	Required
action	The policy action. Possible values are: "deny", "accept", "ipsec", and "ssl-vpn".	Optional
comments	A comment.	Optional
dstaddr	Destination address name. Note: dstaddr6 or dstaddr must be set.	Optional
dstaddr6	IPv6 destination address (web proxy only). Note: dstaddr6 or dstaddr must be set.	Optional
dstaddr_negate	Enable/disable a negated destination address match.	Optional
dstintf	Destination interface name.	Optional
srcaddr	Source address name. Note: srcaddr or srcaddr6 must be set.	Optional
srcaddr6	IPv6 source address (web proxy only). Note: srcaddr or srcaddr6 must be set.	Optional
srcaddr_negate	Enable/disable a negated source address match.	Optional
srcintf	Source interface name.	Optional
additional_params	A comma-separated list of additional params and their values. exmaple: Field1=Value1,Field2=Value2.	Optional
name	The name of the policy to update.	Optional
logtraffic	Enable or disable logging. Log all sessions or security profile sessions. Possible values are: "enable", "disable", "all", and "utm".	Optional
schedule	Schedule name.	Optional
service	Service and service group names.	Optional
status	Enable or disable this policy.	Optional
policyid	The ID of the policy to update.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-firewall-policy-update package=new_package policyid=9 status=disable

Human Readable Output#

Updated policy with ID 9

fortimanager-firewall-policy-delete#

Delete a firewall policy.

Base Command#

fortimanager-firewall-policy-delete

Input#

Argument Name	Description	Required
adom	The ADOM from which to delete the policy. Leave empty to use the default integration ADOM.	Optional
package	The policy package from which we want to delete the policy.	Required
policy	The policy we want to delete.	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-firewall-policy-delete package=new_package policy=9

Human Readable Output#

Deleted Policy 9

fortimanager-firewall-policy-move#

Move a policy in the package.

Base Command#

fortimanager-firewall-policy-move

Input#

Argument Name	Description	Required
adom	The ADOM from which to move the policy. Leave empty to use the default integration ADOM.	Optional
package	The policy package from which we want to move the policy.	Required
policy	The ID of the policy we want to move.	Required
target	The ID of the target policy by which we want to move the policy.	Required
option	Whether to move the policy before or after the target policy. Possible values are: "before" and "after". Default is "before".	Required

Context Output#

There is no context output for this command.

Command Example#

!fortimanager-firewall-policy-move option=after package=some_package policy=1 target=2

Human Readable Output#

Moved policy with ID 1 after 2 in Policy Package: some_package

fortimanager-dynamic-interface-list#

List dynamic interfaces

Base Command#

fortimanager-dynamic-interface-list

Input#

Argument Name	Description	Required
adom	The ADOM from which to list dynamic interfaces. Leave empty to use the default integration ADOM.	Optional
offset	From which index to start the list. Default is 0.	Optional
limit	To which index to get the list. Default is 50.	Optional

Context Output#

Path	Type	Description
FortiManager.DynamicInterface.color	Number	Color of the icon in the GUI.
FortiManager.DynamicInterface.default-mapping	String	Default mapping of the Interface.
FortiManager.DynamicInterface.defmap-intf	String	Default mapping interface.
FortiManager.DynamicInterface.defmap-intrazone-deny	String	Default mapping intrazone deny.
FortiManager.DynamicInterface.defmap-zonemember	String	Default mapping zone members
FortiManager.DynamicInterface.description	String	Dynamic interface description.
FortiManager.DynamicInterface.dynamic_mapping._scope.name	String	Dynamic mapping scope name.
FortiManager.DynamicInterface.dynamic_mapping._scope.vdom	String	Dynamic mapping scope VDOM.
FortiManager.DynamicInterface.dynamic_mapping.egress-shaping-profile	String	Dynamic mapping egress shaping profile.
FortiManager.DynamicInterface.dynamic_mapping.intrazone-deny	String	Dynamic mapping intrazone deny.
FortiManager.DynamicInterface.dynamic_mapping.local-intf	String	Dynamic mapping local interface.
FortiManager.DynamicInterface.egress-shaping-profile	String	Egress shaping profile.
FortiManager.DynamicInterface.name	String	Dynamic interface name.
FortiManager.DynamicInterface.platform_mapping.egress-shaping-profile	String	Platform mapping egress shaping profile.
FortiManager.DynamicInterface.platform_mapping.intf-zone	String	Platform mapping interface zone.
FortiManager.DynamicInterface.platform_mapping.intrazone-deny	String	Platform mapping intrazone deny.
FortiManager.DynamicInterface.platform_mapping.name	String	Platform mapping name.
FortiManager.DynamicInterface.single-intf	String	Dynamic interface single interface.

Command Example#

!fortimanager-dynamic-interface-list offset=1 limit=2

Context Example#

{
    "FortiManager": {
        "DynamicInterface": [
            {
                "color": 0,
                "default-mapping": 0,
                "defmap-intrazone-deny": 0,
                "defmap-zonemember": [],
                "dynamic_mapping": [
                    {
                        "_scope": [
                            {
                                "name": "device_name",
                                "vdom": "root"
                            }
                        ],
                        "egress-shaping-profile": [],
                        "ingress-shaping-profile": [],
                        "intrazone-deny": 0,
                        "local-intf": [
                            "bgp loopback"
                        ]
                    }
                ],
                "egress-shaping-profile": [],
                "ingress-shaping-profile": [],
                "name": "bgp loopback",
                "single-intf": 1
            },
            {
                "color": 0,
                "default-mapping": 0,
                "defmap-intrazone-deny": 0,
                "defmap-zonemember": [],
                "dynamic_mapping": [
                    {
                        "_scope": [
                            {
                                "name": "device_name",
                                "vdom": "root"
                            }
                        ],
                        "egress-shaping-profile": [],
                        "ingress-shaping-profile": [],
                        "intrazone-deny": 0,
                        "local-intf": [
                            "branch"
                        ]
                    }
                ],
                "egress-shaping-profile": [],
                "ingress-shaping-profile": [],
                "name": "branch",
                "single-intf": 1
            }
        ]
    }
}

Human Readable Output#

ADOM root Dynamic Interfaces#
Name
bgp loopback
branch

fortimanager-firewall-policy-package-install#

Schedule a policy package installation.

Base Command#

fortimanager-firewall-policy-package-install

Input#

Argument Name	Description	Required
adom_rev_comment	The comment for the new ADOM revision.	Optional
adom_rev_name	The name for the new ADOM revision.	Optional
adom	The ADOM in which to install the policy package. Leave empty to use the default integration ADOM.	Optional
dev_rev_comment	The comment for the device configuration revision that will be generated during install.	Optional
package	The policy package to install.	Required
name	The device or device group name on which to install the package.	Required
vdom	vdom on which to install the package.	Optional

Context Output#

Path	Type	Description
FortiManager.Installation.id	Number	The installation task ID.

Command Example#

!fortimanager-policy-package-install package=package_to_install name=device_name vdom=root adom_rev_name=testing_installation

Human Readable Output#

Installed a policy package my_package in ADOM: root On Device my_device and VDOM vdom_name. Task ID: 175

Context Example#

{
    "FortiManager": {
        "Installation": {
            "id": 175
        }   
    }
}

fortimanager-firewall-policy-package-install-status#

Get installation status.

Base Command#

fortimanager-firewall-policy-package-install-status

Input#

Argument Name	Description	Required
task_id	The installation task ID.	Required

Context Output#

Path	Type	Description
FortiManager.Installation.adom	Number	The ADOM on which the installation occurred.
FortiManager.Installation.end_tm	Number	The installation task end time.
FortiManager.Installation.flags	Number	The installation_task_flags.
FortiManager.Installation.id	Number	The installation task ID.
FortiManager.Installation.line.detail	String	The installation status details.
FortiManager.Installation.line.end_tm	Number	The installation task end time.
FortiManager.Installation.line.err	Number	The installation error.
FortiManager.Installation.line.history	String	Installation task historical details.
FortiManager.Installation.line.ip	String	The installation IP.
FortiManager.Installation.line.name	String	The installation name.
FortiManager.Installation.line.oid	Number	The installation task oid.
FortiManager.Installation.line.percent	Number	The installation task completion percent.
FortiManager.Installation.line.start_tm	Number	The installation task start time.
FortiManager.Installation.line.state	String	The installation task state.
FortiManager.Installation.line.vdom	String	The VDOM on which the installation occurred.
FortiManager.Installation.num_done	Number	The number of done tasks.
FortiManager.Installation.num_err	Number	The number of errors found.
FortiManager.Installation.num_lines	Number	The number of installation data lines.
FortiManager.Installation.num_warn	Number	The number of warnings found.
FortiManager.Installation.percent	Number	The installation task completion percent.
FortiManager.Installation.pid	Number	The installation task PID.
FortiManager.Installation.src	String	The installation task source
FortiManager.Installation.start_tm	Number	The installation task start time.
FortiManager.Installation.state	String	The installation task state.
FortiManager.Installation.title	String	The installation task title.
FortiManager.Installation.tot_percent	Number	The installation task completion percent.
FortiManager.Installation.user	String	The installation task user.

Command Example#

!fortimanager-policy-package-install-status task_id=175